A3-330C Thermal / Cold Pouch Laminating Machine For Home, Office, School
320MM A3 - 330C Thermal 4 Rolls Laminator Lamination Machine Office
Laminator
Features (Type : 330C ) :
- Compact and easy to use desktop laminator
- Preheat quickly and heat evenly.
- Durable metal body
- Equipped with 2 cooling fans to protect the machine from rapid
cooling.
- Anti-jamming system (anti-jamming release button and anti-jamming
release knob).
Size | Up to A3 (330mm width) (12.99inch) |
Temperature range | 80 ℃ – 180 ℃ |
Laminating thickness | 1 mm |
Laminating Speed | 650mm / min |
Dimension | 540 * 255 * 155 mm |
Roller Diameter | 25mm |
Press rollers | 4 pieces |
Pouch thickness | 38 - 250 microns |
Heating time | 3 - 4 minutes |
Output consuption | 620W |
Net weight | 8 Kg |
Cooling fans | 2 picecs |
Packing | 1 / 4 |
Suggestions for thickness and temperature of plastic film:
- 200mic -- 180 ° C
- 170mic -- 170 ° C
- 150mic -- 160 ° C
- 125mic -- 140 ° C
- 100mic -- 130 ° C
- 80mic -- 110 ° C
- 70mic -- 100 ° C
- 60mic -- 90 ° C
- 50mic -- 80 ° C
Cold mounting -- no heating state ( suitable for cold mounting of
film with a thickness of about 0.6mm ). The above Suggestions can
be adjusted according to requirements.
Prepare :
Insert the plug into the power socket, turn on the power switch,
the power indicator light is on (red), and then the motor starts to
work normally. Turn on the preheat power and start preheating. The
temperature rose rapidly.
Temperature setting :
Set the button to the desired temperature and warm up for about 3
minutes. When the temperature rises to the set temperature , the
work light will be turned on and off many times. The temperature
tends to stabilize. At this time , plastic sealing can be
performed. In the process of work , the constant light will flicker
, and there will be repeated light and dark changes. This means
that the lights will constantly flicker , changing the lights and
shadows repeatedly. Refers to the internal constant temperature
system inside the machine. It is normal when the heating stops in
the switching heating state.
Application :
This machine is widely used to envelop ID cards, office documents,
photos and documentary cards. The cards packaged can resist against
water, alteration pollution, improve their strength and appearance
and extend their storage life.
Maintenance :
1. This machine is an electrical product, so it cannot be sprayed
directly with water.
2. Unplug the plug before fixing it.
3. Do not use gasoline, thinners or metal blades.
4. Remove dust from the machine with a soft cloth.If the dust is
very thick, remove it with a neutral soap or cleaner.
5. The rubber roller and shafei sleeve are regularly filled with
high temperature resistant light lubricating oil.
Attention remarks :
1. Placement
Plastic packaging machine shall be placed in dry and clean
condtions, but not close to the outlet of cooling equipment.
2. Machine operation
Don't spray water onto the machine.
When the machine is heating, don't place any objet on its upper
cover and casing.
3. Sealing material
What is to be packaged in the card protective film can only be
paper and card , total thickness not greater than 1mm. Don't insert
any inflammbale material ( such as celluloid ) and wasily softened
material ( such as PVC and polythene ) into the machine , as they
can be melt down in the machine and product smoke.
Packing : 1/4
Package Type :
strong & standard paper carton
Port : Guangzhou / Foshan / Shenzhen / Ningbo
Quantity ( Pieces ) | 1 - 100 | 101 - 200 | 201 - 300 | > 300 |
Est. Time (days) | 3 | 4 | 5 | To be negotiated |
